Believe me when I say I’ve tried every damn one of these suggestions. Now, with hundreds of dollars worth of DMT wasted, I know how to do it: vaporization.

First off, you do not want the DMT to reach a burning point. So that immediately rules out the “bed of weed” and (especially) the torch lighter scenarios. This will produce absolutely nothing of value, unless you happen to value the inhalation of burnt, useless chemicals. DMT smoke is reminiscent of burning car tires mixed with a bit of plastic and a perhaps a dash of nutmeg. It is not pleasant.

A slightly more valid, but still terrible variation on the “bed of weed” concept is slowly melting the DMT into the weed, then gently igniting the DMT-infused weed. You still end up burning most of the product, but I managed to accidentally produce useful vapors every time. Perhaps you could perfect the technique with practice, but you probably wouldn’t want to. It makes your pipe taste like DMT for weeks (or until you clean it), and there are much easier and more efficient ways to achieve the DMT high.

I heard some acquaintances go on and on about the expensive attachment they acquired for their bong, and after using it I just don’t see the point. For one, you are absolutely losing significant amounts of DMT through that water, since the ultimate goal is trying to make the stuff into a vapor. During my attempt, for the amount used the effects were extremely minimal and disappointing. But after using the spirit molecule I didn’t have the heart to tell my DMT providing friends their money was wasted.

Truth is, there’s no possible way to successfully smoke DMT – that was a doomed experiment. But the good news is that you can vaporize the stuff to great results. If you wanted, you could use your fancy marijuana vape to utilize dimitri. I would not particularly recommend it, unless you have a spare bowl, whip and/or bag to use it with. Anything the vapor touches will be tainted with the smell. When I use a vaporizer for weed, I am savoring the pure, unadulterated flavor that the vaporizer grants me. Therefore, avoid vaporizing DMT in your vape. But if you were wondering, you want to get the stuff to about 155˚ Fahrenheit (or 70˚ Celsius).

My tried and trusted method that never fails is the crack pipe. Or “eucalyptus inhaler,” as you might call it at the glass store. A very basic pipe will do just fine, and will likely cost less than $10 at your favorite head shop. If you’re trying to be resourceful, you can just make a lightbulb vape. I tried making “the machine” out of a bottle, but it was such a waste of efforts. As a note, unlike the bong attachments, DMT-specific pipes are not a scam. They are usually overpriced, but it’s admittedly neat to smoke out of a trippy pipe when doing “the spice.”

Vaporizing DMT is not the most heroic method, as that title rests with oral administration. The most common format any average user will orally administer DMT is within an ayahuasca brew. The recipe for ayahuasca includes taking an MAOI-containing vine and combining it with a DMT-source, traditionally an Amazonian tree. DMT is inactive orally on its own, but the cunning Columbian natives somehow figured out mixing this specific tree with those specific vines can turn into a spiritual activity.

If you want, you can even perform a variation on the brew with similar materials, the specific vines and plants are not entirely important. Keep in mind that different plants will contain varying levels of psychoactives, and different alkaloids/harmaloids. Basically, changing the plants will mean changing the recipe. You’ll want to note how much % of your material is DMT or MAOI, and adjust as needed.

Ayahuasca brews can produce one of the most intense and overwhelming psychedelic and spiritual experiences known to man. It is an extremely long and strenuous process, both physically and mentally. Experiences can take well over 8 hours, and involve fierce bouts of vomiting (described as purging), and intense spiritual revelations. If you are intrigued by that description, be warned that MAOIs can be harmful if you are not careful. Please be sure to educate yourself on the dietary restrictions and various substances you’ll want to avoid. Otherwise you might die or something.

LOTUS

Like or Tweet this!

• 

——————————

            Keeping your smoking instruments sanitary and clean is an important action in order to prevent buildup of bacteria, inhalation of ash and chemicals, and poor smoke taste.  If you own a glass piece, keeping it sanitary is easy to do and doesn’t take very long.  The benefit is a safer, better tasting smoke. You will also be instructed in the creation of crystallized pipe resin.

            First, clean out the ash from your pipe, bubbler, or bong immediately after finishing the bowl.  This will allow you to clean the piece and is important even if it will not be cleaned in order to prevent the ash from falling inside.  Nothing is worse than inhaling a hit of ash.
            For most glass pipes, the beauty of the pipe increases with the amount of smoke resin that accumulates on the inside of the pipe.  Thus, many owners of pipes choose not to clean out their pipes, thinking that cleaning it involves removal of that resin.  On the contrary, a good cleaning with running water and occasionally some soap leaves the mostly oil-soluble resin in place while removing bits of ash and whatever was on the lips of the last toker.
            In bongs and bubblers, replacing the water and rinsing out the pipe is essential.  I do this after every use.  Old bongwater not only looks nasty, smells bad, and makes for crappy smoke, it also can build up chemicals from the smoke which could be hazardous to your lungs.  Do yourself and your smoking clan a favor and wash out that bong or bubbler of yours.
            Every once in a while, you may decide to clean your pipe out thoroughly, for a variety of reasons.  One advantage of owning a glass piece it that the resin inside can easily be removed with acetone, also known as nail polish remover.  If that fails, most head shops offer some type of cleaner such as Formula 420.  What many people don’t know is that you can save this resin (assuming you have a solvent which evaporates cleanly). [Editor's note: An alternative here is high-proof isopropyl alcohol and salt. The purpose of the salt is to provide increased agitation and friction as the tar is dissolved and removed by the alcohol.]
            If you wish to remove the resin to smoke it, save the acetone you used to remove the resin in some type of glass dish, such as a pie pan.  Make sure that the acetone evaporates cleanly by letting some unused acetone evaporate off a clean piece of glass.  If any amount of residue is left after evaporating clean acetone, you will need a cleaner solvent.  If the solvent is good, allow the acetone and resin mixture to evaporate in a well-ventilated location.  If you have access to a kitchen, this process can be sped up by pouring the acetone in a pot and applying a moderate amount of heat (NOTE: Do not do this if you cannot ventilate your kitchen sufficiently.  Also, ONLY DO THIS WITH AN ELECTRIC STOVE.  A gas stove + evaporating organic solvent = BIG  EXPLOSION).
            After all the acetone is evaporated off (make sure there is no solvent smell left at all), you should be left with resin crystals, differing in size depending on the heat of evaporation.  Gather them up with a razor blade and store them in paper or foil.  They don’t taste wonderful, but if the resin is accumulated from months of dank smoking, the combination of cannabanoids produces a truly all-around wonderful high.  Make sure you regulate your dosage, because resin can be as potent as hash by weight.
            If you don’t own a glass piece, wise up and go buy one already. A small piece can be obtained for less than $20 and will give you a purer, cleaner smoke.

——————————

Leave your thoughts by commenting below.

Like or Tweet this!

•